The plant’s finished products are sold both in domestic and international markets. A well-developed network of logistics partners allows for deliveries in the shortest possible time while maintaining quality and safety standards. The plant actively utilizes digital technologies for cargo monitoring and client interactions, ensuring transparency and reliability in deliveries.
Hot-dip galvanized steel products and hot-dip galvanized steel products with a polymer coating are transported by all types of transport in accordance with the cargo transportation rules applicable to each type of transport and the regulatory documents for loading and securing cargo;
- When transporting metal products by all types of transport, including air transport, the permissible unit load on the floor of the cargo hold of the vehicle must be considered.
Requirements for storing finished products:
Transportation of finished products is carried out in accordance with the requirements of GOST 7566-2018.
Storage of finished products is carried out in accordance with the requirements of GOST 7566-2018.
It is recommended to store finished products in closed, unheated and heated rooms, under shelters, or on open areas.
It is not allowed to store metal products with damaged packaging. Any damage to the packaging must be addressed immediately upon detection.
The warehouse area should have a slope that ensures water drainage, and the height of shelves, racks, and pallets for storing metal products should prevent contact between the metal and the surface coating.
If necessary, metal products should be covered with waterproof material.
Rolled galvanized steel with a thickness of up to 0.40 mm inclusive should not be stored in more than one layer. Galvanized steel and chemically active substances should not be stored together.
Steel with a polymer coating should be stored under conditions that comply with GOST 15150 requirements for storage in unheated rooms, in a single layer.
